OUR PRODUCTS’ ADVANTAGES
1. We always insist to use the best and most stable quality raw materials, like Germany BASF products, Japan NPU, USA eastman products, taiwan eternal resin, new ZEALAND NUPLEX products, etc.
2. High covering and adhesion power
3. High gloss, fullness, brilliance
4. Excellent weatherability
5. Good anti-corrosion power
How to Use
Fast Dry Hardener: It is recommended to use below 15 ℃.
Standard Hardener: It is recommended to use at 15 ℃ -30 ℃.
Slow Dry Hardener: It is recommended to use above 30 ℃.
Package: 0.5L*30, 0.5L*24, 1L*15, 1L*12, 2.5L* 8, 5L*4
Storage Period: At 20 ℃ with original sealed, can store more than 2 years.
SURFACE PREPARATION:
1. Surface Should Be Clean And Free Of Dust, Grease And Oil.
2. Old Varnish Surfaces Must Be Sanded Using Grit Sandpaper Number 1200, Before Applying The Clear Coat.
| Temperature& mixed | Temperature | Clear Coat | Activator/ Hardener | Thinner |
| Temperature& mixed | <15℃ | BS/ES Clear Coat | BS/ES Fast Dry Activator | BS/ES Fast Dry Thinner |
| Temperature& mixed | 15-25℃ | BS/ES Clear Coat | BS/ES Standard Activator | BS/ES Standard Thinner |
| Temperature& mixed | 25-35℃ | BS/ES Clear Coat | BS/ES Slow Dry Activator | BS/ES Slow Dry Thinner |
| Mixing Ratio | | 2 | 1 | 0.3-0.5 |
Number Of Coats & Thickness: 2-3 Coats, 40-60μm Flash Time: Allow 5-10 Minutes Between Coats
Apply Using a Spray
Gun Nozzle:
1.2-1.4mm (Gravity Spray Gun)
1.3-1.5mm (Suc Spray Gun)
-Spraying Pressure: 3-4 Bar.
-Spraying Viscosity: 13~18s(Ford Cup #4 At 20℃)
-Number Of Coats: 3 Coats Maximum.
| Drying Time | Temperature | Dust Free | Tack Free | Complete Dry |
| Drying Time | 20℃ | 1h | 2-3 hours | 24h |
| Drying Time | 60℃ | 5 minutes | 10 minutes | 60 minutes |
